NUX NDO6 Queen of Tone Dual Overdrive Pedal ( NDO-6 )

NUX NDO6 Queen of Tone Dual Overdrive Pedal

OUTPUT knobControls the output level of Horseman circuit.
TONE knobControls the treble frequency of Horseman circuit.
GAIN knobControls the drive level of Horseman circuit.
FootswitchEngage/disengage Horseman circuit. Hold it for 1 second, you can turn on/off SILVER mode.
SILVER indicatorWhile you engaged SILVER mode, the indicator will turn on.
Right side (Morning Star)

DRIVE knobControls the gain of Morning Star circuit.
TONE knobControls the treble frequency of Morning Star circuit.
LEVEL knobControls the volume of Morning Star circuit.
FootswitchEngage/disengage Morning Star circuit. Hold it for 1 second, you can turn on/off SHINE mode.
SHINE indicatorWhile you engaged SHINE mode, the indicator will turn on.
Routing toggle switchYou can adjust the order from Morning Star to Horseman or Horseman to Morning Star. Its very useful to stack the sound.
I/O Jacks

INPUTConnect your guitar side to INPUT jack.
OUTPUTConnect the OUTPUT signal to amp side.
EXT. SW: You can use external foot controller (like NUX NMP-2) to remote this pedal.
BF / TB toggle switch: BF means Buffer-Bypass, TB means True-Bypass. You can choose BF while you connect with several pedals in your signal chain to solve tone-loss situation.
IFS/NORMAL toggle switch: QUEEN of TONE can engage INPUT FET STAGE while you toggle to IFS position, that can increase input signal to reach amps breakthrough edge that can drive the tube amplifier hotter.
DC Jack

Use ONLY: 9V Negative Tip power with 100mA.