This VM95 Series cartridge with 0.6 mil conical stylus fits half-inch mount turntables. The cartridges special coil design delivers a powerful output level of 4.0 mV. It also offers excellent channel separation and low distortion for outstanding tonal quality. The durable, low-resonance housing includes threaded inserts that enable the cartridge to be mounted to the headshell with just two screws no nuts required. And since all VM95 Series share the same body, the stylus can be replaced with any of the six interchangeable AT-VMN95 replacement styli.
VM95 Series dual magnet cartridge with 0.6 mil conical stylus
Aluminum cantilever
Specially wound coils increase output voltage
Durable low-resonance polymer housing
Threaded inserts in cartridge body enable cartridge to be mounted to headshell with just two screws no nuts required
Compatible with any AT-VMN95 replacement stylus
SPECIFICATIONS
Cartridge & Stylus
Frequency Response: 20-20,000 Hz
Channel Separation: 18 (dB at 1 kHz)
Vertical Tracking Angle: 23
Vertical Tracking Force: 1.8-2.2 g (2.0 g standard)
Stylus Construction: Bonded round shank
Recommended Load Impedance: 47,000 ohms
Coil Impedance: 3.3 k ohms (1 kHz)
DC Resistance: 485 ohms
Coil Inductance: 550 mH (1 kHz)
Output Voltage: 4.0 mV (1 kHz, 5 cm/sec.)
Output Channel Balance: 2.5 dB (1 kHz)
Stylus Shape: 0.6 mil conical
Cantilever: Aluminum pipe
Static Compliance: 17 x 10 6 cm / dyne
Dynamic Compliance: 6.5 x 10 6 cm / dyne (100 Hz)
Mounting: Half-inch
Cartridge Weight: 6.1g
Dimensions: 17.2 mm (0.68″) H 18.9 mm (0.74″) W 28.3 mm (1.20″) D
Accessories Included: Two 11 mm installation screws, two 8 mm installation screws, two washers
Model: AT-VM95C
Mounting Feature: Half-inch mount
Recommended Load Capacitance: 100 to 200 pF
Replacement Stylus: AT-VMN95C
Stylus Size: 0.6 mil
Type: VM Stereo Dual Magnet
Weight 6.1 g (0.22 oz)
Wire Used for Coil: T.P. Copper
Unconditional Satisfaction Guarantee