Key Features
12 two-way bi-amplified active loudspeaker
800 watts Continuous power
1600 watts Peak power
90 x 45 dispersion
2 HF Compression driver
3 LF voice coil
Advanced Internal FIR DSP
130.5 dB Max SPL @ 1 meter
Specifications
System Type Active : 12 2-way Bi-Amplified
Frequency Response (+/-3 dB) : 60 Hz 20 KHz
Frequency Range (-10 dB) : 55 Hz 20 KHz
Calculated Maximum SPL @1m : 130.5 dB
Low Frequency Transducer Size ( mm / inches) : 332 mm / 12
Coil Size ( mm / inches) : 75 mm / 3
Impedance : 4
High Frequency Transducer Type : Compression Driver
Coil Size ( mm / inches) : 51.2 mm / 2
Exit Size ( mm / inches) : 35.6 mm / 1.4
Diaphragm Material : Titanium
Impedance : 8
Nominal Coverage (H x V) : 90 x 45
Amplifiers
Amplifier Design : Class D
Power Rating : 1600 W Peak (1400 W LF + 200 W HF), 800 W Continuous (700 W LF + 100 W HF)
Power On Protection : Power Switch On/Off Mute
Thermal Protection : Amplifier Shut Down. Auto Reset
Low Line Voltage Shut Down : 80% Nominal Line Voltage
Driver Protection : Independent LF and HF Limiters
DC and Short Protection : Yes
Clip Limiter : Turns on Approx 600 W Output
Limiter Indicator : Red LED
Power Indicator : Green LED
Connectors
Input A type : Switchable Balanced Mic or Line Level Input
Input Sensitivity : Mic:-40 dBu Line:0 dBu
Maximum Input Level : 22 dBu
Input Connector : XLR 1/4Combo jack / 2 x RCA
Input Impedance : Balanced:20 K Unbalanced:10 K
Line Output Connector : Switchable LOOP/MIX Balanced pin XLR Connector
Impedance Balanced : Balanced: 200 Unbalanced:100
Loop Gain : Mic:69 dB, Line:29 dB
AC Power details Power Supply : High Efficiency Switching Mode Power Supply
AC Power Options : AC100-120 V~/220-240 V~,50/60 Hz
Hardware Rigging : M10 x 6
Pole Mount : Dual Angle (0 or 10) 35 mm Pole Socket
Enclosure Material and finish : 15 mm Plywood
Colour Options : Black Rhino Paint
Grille Material & Finish : 1.5 Steel
Unconditional Satisfaction Guarantee
